<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress/2.9.1" -->
<rss version="0.92">
<channel>
	<title>Andrew S. Harmon</title>
	<link>http://andrewsharmon.com</link>
	<description>Design and Engineering</description>
	<lastBuildDate>Sun, 07 Aug 2011 22:18:11 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>Wire Frame Table</title>
		<description><![CDATA[ 
I want to make a dining room table that is reminiscent of a wire frame model (think a computer graphics mesh).  I decided to start small and make this side table.  From this small version I learned that I should use copper clad welding rod instead of stainless (because even though they [...]]]></description>
		<link>http://andrewsharmon.com/2011/08/wire-frame-table/</link>
			</item>
	<item>
		<title>Simple high speed motor</title>
		<description><![CDATA[This is a quick motor I made using a single phase brushless motor controller IC (AH5798-yg) a coil of wire (100 turns of 38 awg)  and a magnetic sphere (Neodymium Iron Boron, N42). Based on the sound (via my FFT app on my iphone)  it is spinning at either 74400 or 37200 rpm.
]]></description>
		<link>http://andrewsharmon.com/2011/06/simple-high-speed-motor/</link>
			</item>
	<item>
		<title>Solid state retrofit</title>
		<description><![CDATA[For my senior design II project I designed a LED light fixture to replace the standard fluorescent ones in the campus apartments.  This is my final report.
LED retrofit fixture Final report

]]></description>
		<link>http://andrewsharmon.com/2011/06/solid-state-retrofit/</link>
			</item>
	<item>
		<title>LEDs! and some other projects</title>
		<description><![CDATA[I would recommend checking out my flickr page for more of my projects (I&#8217;m a little busy right now). But I have been making some custom PCBs, playing with some interactive video, and dabbling in ultracapacitors.

     
]]></description>
		<link>http://andrewsharmon.com/2010/12/leds-and-some-other-projects/</link>
			</item>
	<item>
		<title>Bubbles Display</title>
		<description><![CDATA[This bubble display uses glycerine and air to produce pattens and text.  This version is 8 pixels wide.  The concept can be scaled up in a modular fashion to enable large installations (ie an entire wall in a restaurant or bar, or a free standing divider in a lobby or office).  Control is implemented using [...]]]></description>
		<link>http://andrewsharmon.com/2010/10/bubbles-display/</link>
			</item>
</channel>
</rss>

